rebuilding the Ranger

[user 6493]

ok first right now getting the old truck going is just not going to happen,,,,,but a tear down is in order,,,,engine and tranny are coming out,,,I need the tranny for the new to me truck,,,,,,,,,,,,,,,

the engine will be set aside and repaired,,,I know it needs a all new intake system and there is a sensor on the back of the engine that may need replace,,,I won't know until I have it out

with the hood off and engine out I can then see just how much damage was really done I already know I need the wiring harness and a computer

the heat warped the hood it will not be going back on anything else can be painted,,,,,

I might need a windshield ,,,,,

if I can salvage the truck I will,,,,,,,,,,,,,,,,,,,,,I have no intention of getting caught with no transportation again,,,,,

the AC is the last thing that will be repaired

 

[user 6493]

I am in the process of trying to buy this truck,,,2000 Ranger 4 x 4,,,,I have made a offer of $2200.00

 

[Dani]

What year is it? It looks a little newer than mine, but that is very close. Even the same color.

 

[BucketBack]

What year is it? It looks a little newer than mine, but that is very close. Even the same color.

I'm going to guess it's a 2000 model year

Not many Michigan Trucks look like that after 21 model years

 

[Dani]

My guess was 2008

 

[user 6493]

it is a 2000,,,I would not have one newer,they changed the engines,,,all V6 motors starting in 2001 have multiple timing chains and one of them is on the back of the engine,,,meaning to change it you must pull the engine they have nearly made them a throw away truck by doing this,,,,can you imagine what the cost will be to put in a new timing chain set in that engine ,,,,and few shops will touch that job so you are at the dealers mercy,,,,at around $100 an hour labor plus their inflated parts prices

no thank you

 

[BucketBack]

My guess was 2008

Good old second post nails it

 

[user 6493]

I missed out on the Ranger,,,,going to pick this up in the morning pretty much a done deal......2001 Dodge Dakota,,,,2WD 134 k miles on it $1850.00,,,,I will try to jew him down some in the morning

 

[David SB]

I couldn't even IMAGINE doing a complete rebuild at my age... That's what cash is for

 

[Mountain trapper]

The wife had an '85 or '87 Ranger when we first met. That was a great little truck. I rebuilt the engine at around 300,000 miles. I was hit by an illegal wet back in Oregon doing 70 mph. I pulled him out of his car and beat the crap out of him. Got it fixed and put on another 100,000 miles.

 

[Helen Back]

I would get rid of the wiring/cpu and do the duraspark conversion so it will go after an EMP. The 2150 (non feedback) is a good carb if you stay with the V6.

 

[user 6493]

I am in no hurry to get the 98 Ranger running right now,but it is the better of the 2 Rangers,,,the 2000 will be a donor of certain parts they will all interchange ,,,in the end I will have a new set of tire new seats a better radio and the dome light will work again,,,,all I need is another hood,,,I even have the paint to repaint it,,,,,,by spring the red Ranger will be back

 

[TexasFreedom]

Way back in my youth, my first truck was one of these mini-trucks. I remember trying to haul something and it wasn't even close to being up to the task.. My mindset now is that if the truck does not have an 8 ft bed, it's not a 'real' truck and is of no use to me. That's my personal opinion and I respect that others will disagree. For my needs, it must carry 2 pallets full. It must carry at least 1500 lbs. It must hold my 24ft ladder. And I get better gas mileage with my full size truck than I got with that mini truck.

 

[DrHenley]

So these Chinese pickup trucks

My mindset now is that if the truck does not have an 8 ft bed, it's not a 'real' truck and is of no use to me.

LOL, in many parts of the world this is what passes for a "real truck". They are ubiquitous in Taiwan. I can't even sit in these things without my head being jammed up against the ceiling.

 

[pengyou]

Nice looking truck! Has anyone ever put a diesel in one of these? A 4bt would be a bit heavy - about 400 pounds more than the V6 - I think these also came with an inline 4 at one time?

 

[user 6493]

I got into it today,,,the wiring harness is toast so we just cut wires to get them out of the way,,,,,,I tore the entire intake system off plus the valve covers AC compressor the alternator it was a mess

 

[DrHenley]

 

[user 6493]

ok it was not good but could have been far worse,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, the 2 areas outlined had a heat shield on them...I have pulled it off this morning to see just how hot the firewall got,,,,,,,,,,,,,as you can see that red paint is not even singed the one hole is where the PCM goes it took some heat that right there beside it is a access point for the wipers ,under the dash should have not even gotten warm,,,,the other area outlined is for the heater and AC it came thru this in pretty good shape,,,,,,,,,,,,,,,,,,,,putting the wiring back in will be tiresome putting the intake back is not all that hard,,,,,my biggest concern is all the vacuum hoses being being put back in place,,,,,,,

 

[Proud Prepper]

ok it was not good but could have been far worse,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, the 2 areas outlined had a heat shield on them...I have pulled it off this morning to see just how hot the firewall got,,,,,,,,,,,,,as you can see that red paint is not even singed the one hole is where the PCM goes it took some heat that right there beside it is a access point for the wipers ,under the dash should have not even gotten warm,,,,the other area outlined is for the heater and AC it came thru this in pretty good shape,,,,,,,,,,,,,,,,,,,,putting the wiring back in will be tiresome putting the intake back is not all that hard,,,,,my biggest concern is all the vacuum hoses being being put back in place,,,,,,,View attachment 11404

You should let Joe Biden fix it, he can build it back better.

 

[user 6493]

You should let Joe Biden fix it, he can build it back better.

Biden can't tie his own shoes,,,no way I would trust him with my truck....lol

 

[Maverick]

Ford Rangers and Mazda B series are the same truck, parts interchangeable from 1994 to 2010 in fact many parts in the Mazda says Ford, both the Mazda and Ford both had the same V6 in certain models in them starting in 1994 such as the B4000.

 

[user 6493]

I went out today for parts,,,the yard I went to had nothing,,,,went to another location and hit the JACK POT,,,,they had a 99 model sitting there opened the hood and it looked like it just rolled out of the factory,,,,I made the deal and can get everything I need including a new hood for $125.00,,,,barring rain I am pulling parts tomorrow

 

[user 6493]

I got a lot of my parts today,,it was a pain in the butt but I have them,,,,I have to go back for some more part I was just to beat to crawl around under that truck today

 

[user 6493]

i ORDERED ALL MY GASKETS TODAY I should have them by the weekend

 

[jontte]

when do you plan to have it fixed?

 

[user 6493]

when do you plan to have it fixed?

I just got the last of the parts and I am waiting on a gasket the valley pan for the intake,,,I can not do much until it shows up,,,,once I have it and the weather is good 7 to 10 days before I can crank it over,,,20 years ago I could have tore it down and had it back together in 2,,,,,,,,,,,,,,,,,,,,,,,,,,,,those days are gone forever

 

[jontte]

GG, we might be older but today we work smarter

 

[user 6493]

I HAD IT OUT WITH A SUPPLIER AND HAD TO REORDER THE INTAKE MANIFOLD GASKET,,,,i SHOULD HAVE IT THE FIRST OF THE WEEK

 

[user 6493]

my last gasket showed up today,,,,I need a couple tubes of silicon a roll of electrical tape and a torque wrench,,,I will get all that tomorrow and then the fun begins

 

[user 6493]

i HAVE TO GO TO THE AUTO PARTS AGAIN,,i GOT THE WRONG TORQUE WRENCH