You are welcome!!
John Deere LA165 Riding Mower-Intermittent Spin/No Start
- Thread starter mml373
- Start date
Help Support Homesteading & Country Living Forum:
If I can get 2 more good years out of this riding mower, then I'll consider my investment worthwhile and will look into something different. <haha> Was actually thinking about a compact tractor with a mower deck... That way I can be pretty sure it'd be up to any light tasks "out here". A residential garden tractor isn't too useful, not even on our weed collection in the front and back yards. It's just too rough out here, and big rocks that hide take a toll on spindles, belts, and blades.
Last edited:
Oh, yeah! Thank you, all!! Fixing stuff with the help of the community (dare I say, "friends"!) is better than dealing with a dealer. Hopefully this is the last of the big issues. There's still an engine issue that I'll have to resolve over the winter (will have a friend fix it, he's good at that stuff).You are welcome!!
For farm tractors I’m very familiar with a JD 4720, full cab with air. It’s been a damn good tractor with just regular maintenance.
The business also has a smaller version of the same (forget the model number) it’s fine but weak, needs a turbo.
Neither are new enough to deal with DEF issues.
It would probably be well worth you while to take the ignition switch out and see of you can find a replacement in the aftermarket, or even try to find a Murray dealer or better an independant small engine shop, they often know the weak points in each model. selling dealers tend to have crappy service
I wouldn't buy a made in china tractor from a big name company like Deere, their stuff sucks, if you get a good one you are lucky.
Trivia.. My beloved JD855 compact (25HP, early 1990s?) was wonderful.. A brute for power considering its size and weight.. It did garden tillage, field, yard, driveway maintenance well.. Then I upgraded to a 2015 JD2032R (32HP)... It did everything and more than the JD855 with much more authority..
The only problem I had was both could be overwhelmed moving snow with a pto snowblower if you didn't take your time.. But then in the far north I saw 85HP tractors with snowblowers struggle..
If I had it to do over again I would bite the bullet and spend the extra money for the cab..
My 5 cents of experience..
The only problem I had was both could be overwhelmed moving snow with a pto snowblower if you didn't take your time.. But then in the far north I saw 85HP tractors with snowblowers struggle..
If I had it to do over again I would bite the bullet and spend the extra money for the cab..
My 5 cents of experience..
Thanks & done. Amazon's quicker than JD and I refuse to continue buying OEM parts that don't last, at three times the price, from a company that sends Americans' jobs elsewhere.
Crank stop, crank stop is also a common problem with broken compression release. The cam has a piece on it that slightly opens the intake valve at the right time while cranking. Only fix is taking the bottom case off and replacing the cam.
Made in China? Mexico, South America, sure. But I don't think there's much American market Deere equipment that's made in China. JD tractors are head and shoulders above any other tractors, and I say that coming from a production agriculture background, where the smallest tractors we use in the field are over 100hp. Red tractors are barely adequate, and everything else is worse.
But lawnmowers...there are at least two grades of Deere mowers. The ones you can buy at Lowe's, Home Depot, farm stores - those aren't real John Deere. They are contract made and they're no better than Cub Cadet or Lawn Boy or Poulan or whatever else. But the ones you get at a dealership are the real deal.
I think it depends where you are and what's done. Most out here use blue tractors (including road/hwy maintenance crews), and there are no issues with getting work done. Some are orange. Some are red. Some don't have any paint at all.
Lots comes down to dealers and dealer support/network.Follow up in case anyone sees it. A new ignition solved the spin/start problem, although the new ignition doesn't fit tightly as it should in the slot in the dash of the mower. Oh well. It'll last 2 years and be replaced.
There's now a fuse holder problem. Does anyone have this mower (LA165) and can you take a picture of the fuse holder assembly? I only have one pair of wires going to it and it appears as though one conducting side of the clip holding the fuse has disappeared. I'll get a picture later today. Not sure how half the conductive clip would have just disappeared...but there's no voltage going through to the ignition or even the hour meter. Battery is fine.
As another user posted, stupid failures with this mower are starting to nickle and dime me, but mainly are keeping me from getting work done and becoming frustrating as hell for that reason. JD ought to be ashamed of the garbage they sell. I've literally not been able to use the mower more than 2 weeks this season before some new kind of failure has emerged. Constant fixing.
I'd love to upgrade to an 855 or its "baby brother" but money isn't going to be there till 2026 given other needs (hay equipment). For that same money, or less, I can buy a new Kubota mower with full warranty.
Last edited:
I would not recommend a JD anything these days , the company has gone for $hit. Kubota still seems to build a decent product.
- Joined
- Dec 4, 2017
- Messages
- 7,924
I wouldn't buy a new JD but the older ones (e.g. 855 are good tractors). Last made in 1998.
https://www.tractordata.com/farm-tractors/000/1/3/130-john-deere-855.html
Engine is actually a Yanmar and those little 3-cyl models are pretty bulletproof.
the tractor might be alright, but the dealer support still sucks, and the green giant bought up most of the aftermarket parts dealer too. So just on principle I wouldn't buy a deere built after the mid 80 S and it would have to be a bargain cause prices for parts are ridicules.
