- Joined
- Mar 29, 2013
- Messages
- 18,396
Dang. And I have a hard time dealing with something that's a 1/16th out of square.
This was an old mining home built by the coal miners. Previously the miners lived in tents. There are NO footers under the walls. Dug down to the shale and started stacking bricks.Dang. And I have a hard time dealing with something that's a 1/16th out of square.
I had previously mentioned that funky section of wall. Here are a few images of just how funky.
Far from square with the outside wall. Yup that is plant trying to grow there.
View attachment 171689
But it was even worse at the top!
View attachment 171690
I never realized how twisted that wall was.
With the drywall removed I have this.
View attachment 171691
I failed to share a good image of the fireplace insert mock-up.
View attachment 171692
Ben
Ghetto remodeling.That's beyond bad carpentry. It had to be done that way on purpose. Have you discovered a logical reason for the angle? a lighting issue from the window? Something had to be moved along the wall or through the window? Just guessing...
8 fireplacesHard to answer that question. It is one if the flues in one if two chimneys from when the house was built 100 tears ago. The house had 8 fireplaces with four flues in each of the chimneys. Guessing an 6x6 ir 8x8 inch flues.
Many years ago a coal fired convection furnace was installed in the Hobbit Hole area. That was replaced by a gas fired forced air furnace in the 1950's. In the 1980 I had a high efficiency furnace installed so the flue was then used for gas fired water heater. So that is what I know.
Ben
Yup8 fireplaces
Less than 1/4 of my place is still plaster and lathe. The rest have been changed.@Neb good luck. I had my share with an 1872 house and fixing a hundred years of remodels. Have my handful with a mid 1970 and their mistakes.
It does look really cool and above my drywall ability. Probably why those features are in a lathe and plaster house.